"Crop Mate Powered Picking Trolley"
Chassis Specifications
- Overall length 1250mm (including bump stops)
- Overall width 570mm
- Wheelbase 910mm
- Wheel track designed to run on 50mm NB pipes set at 450mm centres
- Wheel type steel flanged, boss diameter 80mm, flange diameter 200mm
Sideways Movement Wheels
- 50mm dia rubber
- Lever operated to lift steel wheels 25mm off floor
- Specially designed so that both sets of wheels move outwards on lift to a width of 548mm
- This gives max stability when machine is being moved sideways
Deck Specifications
- Overall length 1075mm
- Overall width 400mm
- Minimum deck height (measured from rail height) 550mm
- Maximum deck height 1600mm
- Radiused corners to avoid plant damage
- Standard deck available on request
- Electric deck adjustment available on request
- Control box moves with deck
- Deck material, aluminium treadplate
Drive System
- 24 volt, 220 watt PM motor with integral worm drive reduction box
- Chain drive to front axle
- Automatic electric park brake with switched or manual override.
Operating Features
- Foot switch on deck floor
- Control panel mounted on post which incorporates the following features
- Ignition switch
- Max speed selection rotary potentiometer
- Forward/Reverse switch
- Battery low light
Electrical Features
- 2 40 Ah fully sealed batteries (larger capacity on request)
- Separate battery charger (to comply with electrical regulations)
- 100 AMP DC speed controller with fully programmable functions (E.g. man speed forward/reverse, max acceleration/deceleration etc)
- Reverse beeper
- Battery charger plugged inhibit feature
- Automatic fault diagnostic unit
- (In the unlikely event of the machine developing a fault the battery low light will flash a number of times – the number of flashes will allow us to identify the fault)
Special Features
- The Harford Greenhouse Vehicle has a fully dip galvanised chassis
- There is no metal to metal rubbing surfaces
- All bearings are no maintenance nylon bushed and the deck runs on nylon wheels
- Special design features as required
- Colour options to suit company image, all coloured parts are powder coated
- NZ design
- NZ made
- NZ parts
- NZ service